is supported by readers and may earn an affiliate commission.

Rather have a pro do it for you?

Tools and Supplies to trap backswimmers in your pool or pond
1 Pool skimmer net
2 Pool vacuum
3 Water testing kit
4 Algaecide
5 Pool shock
6 Pool thermometer
7 Water clarifier
8 Pool brush
9 Pool cover
10 Pool chemical dispenser

How to trap backswimmers in your pool or pond

Effective Ways to Catch Backswimmers in Your Pool or Pond

Backswimmers, also known as water boatmen, are common insects found in pools and ponds. While they may not pose a direct threat to humans, their bites can be painful and their presence can be a nuisance. If you're dealing with a backswimmer infestation in your pool or pond, here's a step-by-step guide on how to trap them:

Step 1: Identify the problem areas
The first step in trapping backswimmers is to identify the areas where they are most active. Look for areas with stagnant water, such as the corners of your pool or pond, as these are the areas where backswimmers are most likely to congregate.

Step 2: Use a fine mesh net
To trap backswimmers, you'll need a fine mesh net. This will allow you to scoop up the insects without letting them escape. Slowly move the net through the water, making sure to get it as close to the surface as possible. Backswimmers are surface dwellers, so this is where you'll find them.

Step 3: Keep the net still
Once you've located a group of backswimmers, keep the net still for a few seconds. This will allow the insects to settle on the net, making them easier to catch. Slowly lift the net out of the water, making sure to keep it level to prevent the backswimmers from escaping.

Step 4: Shake off the backswimmers
Once you've lifted the net out of the water, shake it gently to dislodge the backswimmers. If you're doing this over your pool or pond, make sure to shake the net away from the water to prevent the insects from falling back in.

Step 5: Dispose of the backswimmers
After you've trapped the backswimmers, dispose of them properly. You can either release them back into the wild or dispose of them in a sealed container.

Step 6: Repeat the process
Trapping backswimmers is an ongoing process, so you'll need to repeat the above steps regularly to keep their population under control. Make sure to focus on the problem areas and be patient – it may take a few tries to catch all of the backswimmers.

In conclusion, trapping backswimmers in your pool or pond is a simple process that requires a fine mesh net and a bit of patience. By following the above steps, you can effectively control the backswimmer population and make your pool or pond a more enjoyable place to be.

BioGuard Back Up 2 - Pool Alga...

Check Price
Pool Algae Control Kit

Check Price